Repair Kit Options:

Repair Kit (without flakes) for Heavy Flake Floors - $120

This option is for you if you have a Full Broadcast Flake Floor (Heavy Flake Floor) but do not need to buy any flakes. If you need flakes with the kit or have partial flake floor then see your other options on this page further below.

Includes:

Color Bottom Coat 2 oz (enough to cover 2 square feet) of Fast Dry Polyaspartic Floor Coating (that is 100% compatible with epoxy) in grey, dark grey, black, tan or white.

The kits also include Clear Coat (2 oz enough for about 2 square feet) of Fast Dry Polyaspartic Floor Coating (that is 100% compatible with epoxy), Mixing Sticks, Six Paint Brushes (Two Small Pointed Brushes and Two Small Flat Brushes, and Two Larger Flat Chip Brushes), Scraper for scraping over Flakes to remove jagged and sharp edges (if needed), Sand Paper to ruff up the concrete surface before coating, Degreasing Wipes for cleaning the concrete surface after you scuff it up with the Sand Paper, a blue Tarp to mix the product on and protect your floor with, Nitrile Rubber Gloves, Empty Mixing Containers, & Rags to Clean Up.

If your floor has a Full Broadcast of Flakes and you do not have your own flakes left over from the original installation of the floor then choose the next option...

Repair Kit (with Flakes) for Heavy Flake Floors - $145

This kit comes with everything that the kit above comes with PLUS half a pound of flakes which will cover at least 2 square feet. You will need to select the blend of flakes you want and provide us with the color blend name from Torginols Website https://torginol.com/products/flake-flooring

Unfortunately, we can not tell you what Flake Blend you need to buy based on a picture. Phone, Camera and Screen resolutions vary from device to device so we can not be responsible for the flake blend name selection. You will need to look at Torginols website and provide us with the Flake Name that you want included in your kit (if you want flakes.)

Repair Kit without Flakes for a Solid Color Epoxy Floor which Includes the Color Matching - $170

This kit comes with everything that the first kit comes with PLUS color matching services. If you have a partial chip floor which means that you can see the floor coating in between the flakes then you must have us match the color because there are an infinite number of shades of each color, so even if you have a "light grey" epoxy floor the chances of our "light grey" matching your grey are 0. Even if you think the grey on our video or on our pictures is the same grey as yours, the odds of that being accurate when actually put side to side are 0. If you have a partial flake floor then you will need to mail us a piece of the floor that peeled. We need at least 2 pieces that are two inches by two inces. If you floor is already peeling then simply peel back more with a razor or use flat head screw driver or a knife and try to get a little more up. You will then need to mail it to us so that we can match the color manually. The Color Match is $50 and the standard kit without flakes is $120 which makes this kit $170. If you want to add flakes then see the next option. Contact us by texting 713-907-4830 or emailing houstonfloorcoatings@gmail.com before peeling up a piece with a picture of your floor to verify it is a color we think we can match and then we will give you mailing instructions.

Repair Kit with Flakes for a Solid Color Epoxy that Includes Color Matching - $195

Same as the above kit with Flakes.

To Place an Order:

Email Don Sanderson at HoustonFloorCoating@gmail.com

 or text message me at 713-907-4830   

(text only please because spam phone call settings)

Please include the following in your email or text mesage: 

1. Name

2. Phone Number

3. Mailing Address

4. Email Address for Sending You an Invoice to Pay

5. Repair Kit Option that you want 

6. Color Name (Light Grey, Dark Grey, White, Tan or Black.)

7. Flake Blend Name if Applicable